DIY Repairs For Ducted Heating System

Whether searching for a replacement to the existing heating system or looking to install one, ducted heating is always on the top of most people’s lists; however, what really is it and the so-called benefits of using it at home?

A ducted heating system is probably the most used and installed heating system in the house. While there are the alternative ones like home insulation, split system or reverse cycle, wood fire heaters, and plug-in heaters, the ducted heating stands out among the rest as this system provides you benefits that the others don’t offer. The unit is a big money saver, energy-efficient, and the best thing is, you won’t have to worry if the system will complement your home’s interior design, because it’s not tricky to deal with, plus most of its designs give off a modern feel.

This type of heating system makes use of ducts (thus the name) for the transportation of heat in the given area. Aside from insulated ducts, the system is composed of a heating unit and thermostat; the ducts let you transport the heat from the heater to the given areas or rooms in the house, while the thermostat lets you set the temperature of your preference.

How does ducted heating work?

It’s pretty simple: the heating of the unit system will initiate the transportation of air from the room to through its vents or grilles. After that, the air will be transferred through the heater, and once the system detects that it’s warm enough, the air is then circulated back to the room through the system ducts. The process goes on until the user’s desired temperature is reached.

ducted heating cost

How can you do the ducted heating repair by yourself?

As easy as how this system may seem to work, it may come pretty rough once it stops working or it gets a little trippy, signaling you to do some repairs. To begin with, doing repairs when you have no basic knowledge or without professional supervision isn’t recommended; this may lead to spending a huge amount of money (for tools), an unfixable and broken ducted heating or worse, accidents. You don’t want that to happen, do you? This is why there are a lot of companies that offer repair and maintenance services for such home equipments. This may come a little bit expensive, depending on what’s to be repaired in the system, but you won’t want to spend another set of money to buy a new unit. However, to keep those repairmen away for a long time, here are some helpful tips you might want to take note of:

1. Clean the filters.

Clogged air filters can usually reduce the efficiency promised by the unit. With all the potential components that are scattered in the atmosphere of your house that may block the ducts, it will be pretty hard for your heating system to actually do a great job with heating up your place. Schedule a regular cleaning to make sure this issue is handled every now and then. Additionally, you can go for filter replacements twice a year.

2. Inspect the ducts for possible leaks.

This is also one of the factors that cause efficiency reduction. A thorough leak inspection is necessary as even the smallest leaks can lead to heat and energy wastage in the system. If you find leaks, it’s best that you tell a ducted heating service provider and let them do the job.

3. Make a schedule for the system’s maintenance.

As usual, maintenance services may cost you a lot, but it’s nothing compared when you need to replace your ducted heating. This is very important as this is where you’ll know potential problems in the unit; this way you’ll be able to take action on it to avoid anything from getting worse.

 

Benefits of Ducted Heating Systems

How effective your heating system will be during those winter periods or on just any other cold day, depends on several factors, but the key to the situation is a blend of quality and efficiency of your heating system. There are several types of heating systems, each designed with a unique technological aspect to aid in its objectives. Choosing a heating system to settle for, can majorly be linked to two considerations.

These are:

  • Size of the area to be heated – You need to know dimensions that each heating system can serve, the base this knowledge on whether you want a sectional heating of your house or an entirety heating of the house.
  • The duration of use – check on the expected lifespan of each heating system available and settle for one that fits into your program, be it a short duration or longer durations.

In line with that, one type of heating system that has enjoyed a fair share of fame amongst users is the ducted heating system or also known as a gas ducted heating system.

Working the principle of Ducted Heating Systems

The ducted heating system, as the name suggests, incorporates the use of duct system that is laid on beneath the floor or on the roofs. Warm air is then distributed within these ducts that serve as a heating system. The outlets should be perfectly positioned to guarantee optimized distribution of heat within the area desired.

gas heater servicing

Equally important is to note that the duct heating system often uses a single point of gas generation. From this central point, the gas is multi-distributed to several locations. It is, therefore, therefore a suitable heating system for a large area.

Benefits of Ducted heating systems.

With comparison to other systems, the duct heating system is picked to stand out with an inclination towards these advantages:

  • Efficient – Duct heating systems are very stable. They are non-party to effects of the surround temperatures. This puts them a head in terms of the quality of ducted heating service they would deliver during extremely low temperatures. Efficiency of this system is also depicted when it comes to how quick it takes to achieve desirable temperatures.
  • Cost effective – Unlike the traditional heating systems that required lots of energy to work, duct heating systems require relatively low energy consumption. A study by a relevant company estimates that you would save about $534 yearly when using gas duct heaters. This value is brought about by the low frequency of breakdown and maintenance that this system needs.
  • Comfortability – Some heating systems can produce air that irritates the skin and the eyes. This is not the case with ducted heating systems.
  • Environment friendly – Carbon dioxide emission remains to be one disadvantage of heating and cooling systems. Any system that produces very low amounts of CO2 is good for the environment. A study puts the values of carbon emission by ducted heating systems to about 0.69T to 1.99T, which is pretty good in comparison to values emitted by other systems.
  • Durability – Ducted heating systems last way longer in terms of years of operation. With proper maintenance of, the system you are guaranteed of even more years with your ducted heating system. There are several recommendations on how to properly take care of your system. Some advice on ensuring servicing within intervals of at least 2 years. It’s prudent to have your system checked pre-winter and post winter.

In conclusion, you can be assured of quality and reliability when it comes to ducted heating service. There’s more to it than just heating. It provides the room for addition of a cooling system and it also enables zone control, which entails the ability to control the supply to a particular area. Let your choice of a heating system not infringe your ability to enjoy the services you need.

 

The Ultimate Five Secrets of A Complete Air Conditioning Service

Did you know that the best time to service your air conditioner is when winter is in full swing? It’s because technicians are relatively free at this time, and are more than willing to quote lower rates for an air conditioner service.

air conditioning service

Service or maintenance is inadvertently necessary as it’s only if you air conditioning unit is fully functional will it be able to serve you well during the hot summer months. Read on to find out some secrets to a comprehensive servicing of your AC system.

  1. The simple task of cleaning your filters goes a long way at improving your cooling efficiency. Though you may not have used your AC system in winter, the filters still accumulate dust and get dirty. And if you haven’t replaced the filters recently, you may as well do it as it’s recommended to replace filters every six months.
  2. With the exterior condenser coils circulating inner hot air to the outside, it can get quickly blocked by dirt and debris. You may feel that you can remove any leaves and debris that may have gotten stuck in the fans. However, it’s not recommended as it can lead to damages and eventual repair or replacement. It’s instead better to call the experts to do a professional job.
  3. Another important secret of your air conditioner service routine is maintaining the coolant lines. It’s these coolant lines that carry the refrigerant to the evaporator, which is why they are well insulated.However wear and tear can lead to the insulation coming off, especially when it lies inactive in the winter months. The poor insulation of the coolant lines leads to heightened utility bills because of the amount of energy that’s lost.And all that energy goes to waste as your home isn’t even cooled well because of the poor insulation. All this can be avoided if you have professional AC technicians wrap the coolant lines with insulation wire in time to cool your home well in summer.
  1. Leaks not only waste lots of water but also lead to numerous household problems. This is because any prolonged leakages in walls or your home’s infrastructure weaken the infrastructure and also invites unnecessary problems like molds, bacteria, and pests.The secret to avoiding these problems is to fix leaks when they are small, and before they grow into bigger problems. Your AC technician will be able to find out the cause of the leak, which may be a dirty filter, repair it and prevent future leaks.
  1. There is always the possibility of your coolant coils freezing up, especially in winters. The most common reason for its freezing is the loss of refrigerants in the AC system. This is why it’s important that you call your AC technicians at the first signs of the coils freezing as frozen coils will lead to the malfunctioning of the unit. Failure to do so will only lead to a further loss of the refrigerant, where you eventually end up with an ill-functioning AC system.

air conditioner service

Now you know the secrets to a complete air conditioning service, it’s well worth spending the time and money servicing your AC unit!

 

How to Troubleshoot And Repair an Electric Water Heater

 


heating repair

Here are 6 useful tips to help you with electric water heater repair and troubleshooting:

  1. Leaking water

If you’ve found several leaks with a new heater, then there might be a leaking connection at the cold water outlet or hot water inlet. In most cases, you can identify the leaks around the pressure and temperature relief valve or around those heating components. To resolve this problem, it often requires a heater repair. However, it is rare for a new unit to leak.

  1. Dripping water

When drips are identified at the discharging pipe of the pressure and temperature relief valve, perhaps the water pressure in your house is too high and the system might need a thermal expansion tank.

  1. No heated water

It often takes a couple of hours for a new electric water heater to get the usual operating temperature. So if you do not feel the water being hot or even warm after 2 hours, make sure to check if the unit is connecting with electrical power. In fact, lacking power is one of the most common reasons for this problem.

  1. Water pressure

Use a gauge to examine the pressure of water in your home. In most case, the recommended pressure ranges from 45 to 55 PSIG. If the reading exceeds this range, you need to adjust the current regulating valve immediately or set up a new one.

heater repair

As for water pressure problems, ask for help from an experienced plumber or a local water utility. Most of the plumbing standards require a PRV when the pressure of water is higher than 80 PSIG.

  1. Check for electrical power

To check for electrical power, you can use a circuit tester. However, a meter – which measures voltage – is necessary to implement a more thorough diagnosis of some electrical issues.

First, you need to turn off the circuit breaker that is marked as “water heater” or remove the fuses. After that, remove the upper access panel of the heater, the insulation, as well as the plastic cover. Find out the power supply wire. Turn on the circuit breaker and measure the voltage.

  1. Not enough hot water

In case your new heater does not produce enough amount of hot water as expected, you might need to adjust the thermostats. In most cases, it is recommended to set the temperature no more than 120 Fahrenheit degrees since a higher temperature is likely to increase the risks of scalding injuries. Another possible cause is that your unit might not get the right voltage. In other words, the water heater would be so small compared to your usage.

  1. Thermal expansion tank

Water always expands when it is heated. Thus, most modern heaters come with some backflow prevention valves to help keep the water from entering the water supply again.

A thermal expansion tank is often designed with an internal air bladder that would take in all expanded water to protect your water heater. For this reason, most houses need this unit, otherwise, they would face a dripping discharging pipe.

 

How to Determine a Good Electrician

Electrician is known to be a reliable, high paying job that most people could do. Because of this there are currently a lot of electricians on the market and like any field they run the gambit between amazing and terrible. The problem is you can’t afford to hire a bad electrician. Hiring a bad employee in most fields will cost money, hiring a bad electrician may cause damage to property, or harm you or the people you work with. Here are some ways to tell a good electrician from a bad one.

electrician

Licensing and Education

Do your background research, you need to determine that your electrician is qualified, that they had a quality education, are fully certified and have current licences. Experience isn’t always necessary, but it does always help, and having successfully completed apprenticeship and qualification courses is the bare minimum. If you are working with a company, you need to be sure that the company and individual are accredited.

Reliability

It’s often said that an electrician never turns up on time, but just because someone else’s standards have dropped doesn’t mean yours should. If an electrician can’t be bothered to turn up when they should or shows signs of being ill prepared they shouldn’t be trusted with your wiring. Certainly, things happen, and you can’t hold someone accountable for a traffic jam or emergency. Still, if your electrician doesn’t show up for hours or on the day they say they will without prior warning they shouldn’t get your money.

 electrician east melbourne

Honest and Complete Communication

Good electricians need to be able to communicate the nature of the problem, even if you don’t completely understand everything at first make the effort to talk about the problem until you have a realistic idea of what exactly they’re doing and have a quoted price. If they have a plan and method in mind that they can share with you before they begin that’s a good sign and if they can’t estimate time or cost, you should pass.

Keeping up to Date

This can be one of the harder traits to check for, but if you do a little research and are willing to ask questions you can secure a professional who is up to date on new technologies and techniques. A person is only as good as the tools they use.

Reputation

You can’t beat word of mouth for recognition. If you know someone who raves to you about how great their electrician is, you might want to consider hiring them. If no one has any recommendations, there are several general review sites (like yelp) that can tell you how good your electrician is. If someone is well rated they probably know their stuff. It’s not 100% reliable but it’s a good tool for deciding between candidates.

Sadly, there are no absolute tests for exactly what makes a good electrician, but if you’re willing to take the time to ensure that your electrician is reliable, honest, qualified and comes recommended there’s a good chance you won’t be risking yourself, friends or workmates. Keep in mind that someone who exhibits all these traits might not be the cheapest on the market. The mid-range of standard pricing is your best bet, as it’s where you tend to get good honest work.

 

Tips for a Successful Air Conditioning Installation at Home

Are you tired of your home feeling too warm and stuffy? Maybe it’s time to install an air conditioner in your house. There would be a lot of things to consider once you decide to purchase an air conditioner for your home, and a lot of them is to make sure you have a successful air conditioning installation. Read on to learn a few tips so that you can be assured of a fully functioning and energy-saving air conditioning unit in your home.

  1. Be clear about your air conditioning requirements.

Do you want your whole house to be air conditioned, or do you only need a cooling mechanism for your bedrooms? Do you need both a cooling and heating function, or would you just prefer the former? There are many specifications and details to your future air conditioning system that heavily relies on what your cooling requirements are. Given this, before you start any kind of air conditioning installation in your home, clarify what your home needs and discuss them clearly and in detail with your air conditioning expert.

  1. Check and double check the specifications of your air conditioning unit.

Your air conditioning service team will provide you with a recommendation in terms of the size and capacity of the air conditioning unit you will need, based on your home’s requirements. Have them explain to you why their recommendation is as such, and look through their calculations so you understand what they mean.

 aircon repairs perth

Once you are clear on their recommendation, be sure to find an air conditioning unit that satisfies all the specifications in the recommendation. And don’t just go for the most affordable unit you find – read through the specifications and functionalities of each of your options and, along with their price points, decide on which unit will ultimately meet all your needs.

  1. Look through and inspect your entire to make sure all air ducts have been properly sealed.

We all want an air conditioning system that is efficient and energy-saving. Given this, one of the first things you should do to ensure this even before the air conditioning installation takes place in your home is to make sure you are able to seal off all the air ducts in and around your home. Any gaps that can lead to cool air escaping your home will mean more work for your air conditioning unit, and more energy wasted, that will ultimately leave a dent on your energy bill.

  1. Plan the location of the air conditioner in your home efficiently.

Deciding on where your air conditioning unit will be placed in the home is critical, so that you can optimize the flow of air in your home, but also to minimize noise from the air conditioner. Given this, have a proper discussion with your air conditioning specialist and review the blueprint of your home properly so you can agree on where the air conditioner should be positioned that would be most effective.

  1. Call the right air conditioning service team to do the installation for you.

Air conditioning installation in your home will be a lot simpler and less of a headache if you have the right team working on it for you. Find the most credible and reliable air conditioning service team in your area and have them do the work for you. Again, as with the air conditioning unit, don’t just go for HVAC experts with affordable services. Instead, read through the feedback and reviews from previous customers, check if they are licensed, certified and has all the proper business permits to operate, and do a proper interview before you award the project to any team in particular.

 

Reasons Why You Should Hire a Licensed Electrician

You’re looking to start a new DIY project in your home and realize you’ve been meaning to do some electrical repairs on some issues you’ve encountered over the last few weeks. You’re excited to take on the project, but before you get started, consider the possible repercussions if this DIY project goes wrong.

Electrical work in a home requires the right experience and knowledge, and isn’t ideally taken as a DIY project. It would be best to contact your neighbourhood electrician to fix the matter for you, but if you’re not convinced, read on to find out more reasons why you should leave electrical repairs to the capable hands of electrician Melbourne.

1. You don’t need to worry about getting approval from inspectors after an electrical project.

Unlike redecorating your living room or installing a new set of shelves in your bedroom where there’s no need to acquire permits or have inspectors visit your home to check your work, electrical repairs and projects will require just that. And while you might be able to squeak by in doing the electrical repairs yourselves, the output might not be up to standard with your inspectors.

Eliminate this worry altogether by hiring an electrician to do the work for you. He is well qualified and experienced to know how to do an electrical job the right way that will pass with flying colors with an inspector.

led light fittings

2. It is safer to hire an electrician to do the electrical repairs for you instead of you pulling a DIY weekend project on your electrical systems.

Unlike DIY projects like repainting your home, working on electrical repairs or electrical installations poses many risks and dangers. Working with electricity requires you to have a good understanding of proper safety guidelines, as well as enough hands-on experience prior. Only a licensed electrician will have these, so it’s better to entrust your home’s electrical repairs to him.

3. There are more fun DIY home projects you can do that are not as risky, less complicated, and ultimately more rewarding.

As mentioned earlier, there are so many DIY projects you can in your home: from repainting the walls of a particular room in your house, building new shelves for your bedroom, redecorating the living room, or adding new plants to the backyard and the garden. A house is never lacking of DIY projects, so why not choose the simpler, more fun projects to do with your family and leave the more complicated and technical aspects like electrical work to the experts?

4. Hiring an electrician might cost you more than doing the electrical repairs yourself, but it can save you more money in the long run.  

So you’re confident enough to take on your home’s electrical repairs yourself, and after committing one full weekend to it, you think you’ve got the job done. That is, until your circuit breaker trips again after a few days and you discover you have the same problem as you did the week before.

You might think that hiring an electrician might be costly compared to your “free” labor, but if you’re not able to fix the electrical problem correctly, it can lead to even greater problems in the future, and quite possibly accidents too. So don’t be stingy when it comes to hiring an electrician – hire the best one you can find and think of it as a worthy long-term investment.

electrical contractors

 

Do You Want to Be An Auto Electrician?

Have you always had a passion for fast cars and exotic automobiles? Have you always been fascinated with how engines work and the many little intricate details that go into the perfect vehicle, the perfect automobile? Are you the guy your friends call whenever they have a car emergency?

At the same time, do you have a good working understanding of the basics of electric concepts and principles? If so, you might want to consider taking up a career as an auto electrician Melbourne.

Also known as a car electrician, this unique type of electrical contractors is specifically trained to work on various vehicles, with a keen understanding on their engines and electrical systems.

electrician Adelaide

What are the career opportunities available to an auto electrician?

Should you decide to pursue becoming an auto electrician, there are plenty of career options available to you once you undergo the necessary training and apprenticeship programs and obtain the proper licenses and certifications. Read on to learn more about just a few of the numerous career options that would be available to you.

1. Working for a car manufacturer or care dealership

Depending on the manufacturer or dealership you end up working for, this could mean that you will be working on a specific vehicle brand and their many different models. Working for a car manufacturing company usually entails a handsome monthly salary as well as benefits, so it’s a pretty ideal gig.

You will, however, be working under strict corporate rules and guidelines and might eventually find the job to be too repetitive, but it’s a good place to gain experience and learn from the experts.

Working for a multi-brand car dealership might be a more interesting position if you are the kind of person who likes working on different brands and different kinds of cars.

2. Working in an automotive shop

Do you like solving problems and meeting and dealing with all kinds of people? If so, as an auto master electrician you can also apply to become a Quick Spark supervisor in an automotive shop. In this kind of working environment, you will be faced with a unique set of challenges daily, based on the customers who come into your shop everyday.

3. Open your own automotive electrical repairs shop

Have you ever thought of yourself as a businessman? If you have an entrepreneurial mindset and have always wanted to be your own boss, being an auto electrician can work for you, because with your training and experience, you can actually start and open your very own automotive shop.

You’ll need a lot of business acumen and marketing savvy in order to gain a steady clientele, and you will need to make sure your shop offers impeccable service and quality work. Additionally, you’ll need to be able to hire the best talent around and keep them happy, so they would want to keep working for you.

Worried you won’t be able to face the daily pressures of running a business on your own? Why not find a business partner you can split the work and share the future success with.

electrician Melbourne

Common Home Light Switch Wiring Mistakes To Watch Out

electrical contractor adelaide

When you want to do your light switch wiring in your home, you should be aware of the mistakes that can cause danger in your home. By taking care of these dangers especially during installation, you will take care of some of the threats that may exists thus enabling you to improve safety as well as comfort in your homes. Here are some of the common home light switch wiring mistakes to watch out during installation:

  1. Overlamping during wiring

What it means is that a light fixture with a bulb of higher wattage can cause problems when fixed in fixture is not designed for. The intense heat of the bulb can scorch or even melt the socket as well as insulation on the wired on fixtures thus increasing the arcing risks sparks, which jump throughout the air especially from a given wire to another leading to electrical fires.

  1. Uncovered Junction Box

Because any junction box can house all splices, where these wires do connect to each other, or with a person might inadvertently damage them leading to a shock. An expert who does the wiring should ensure that these wires are not within reach since they might lead to electric shocks in many cases.

 electrician east melbourne

  1. Too Few Outlets

This means that Heavy reliance on power strips and extension cords that may be dangerous for the people who use the specific house. During wiring, the electrician need to use a heavy-duty extension cord of 14-gauge or even thicker. With a thicker wire, it will lower the number of the gauge number as opposed to using an undersized extension cord of 16-gauge or even smaller. Why so? Because it can overheat to ignite fire when loads are so heavy. When you suspect that the wiring was not done properly, you should ensure that you hire a licensed electrician who will patch these holes to avoid fire breakouts in your home.

  1. Overwired Panel

Any electrical panel has more circuits that handles too much electricity while handling numerous single-pole breakers. When you have tandem breakers or two circuits in a given slot, it will help the tandem breakers with the same high-amp and double-pole breakers capable of taking two slots within a circuit. By labelling every panel through specifying on how many circuits each panel should accommodate, it can help reduce the consequences of high power output that may lead to damages in your home.

 electrical contractor melbourne

  1. Aluminum Wiring

Using Aluminum Wiring means that you have a kind of wiring, which was used during the 1960s as well as ’70s especially as a copper substitute since it cheap. However, in many cases, people no longer consider it as safe. The main danger is that when aluminum corrodes especially when it is in contact with pure copper, it can lead to arcing as well as fires. You should ensure that your home light switch wiring is done on pure copper as a way of avoiding these mistakes that might lead to fire and huge losses.

In conclusion, the above are the top 5 home electrical wiring mistakes that you must consider whenever you want to do an electrical installation.

The Best Air Conditioning Unit For Your Home

In the heat of summer, every homeowner wishes that they had a system of air conditioning. If it is time for you to get your first air con system or you want to replace your old unit; the first step is choosing the right one. Cooling systems come in various designs including outdoor compressors, portable units, and central systems.

This guide from air conditioning Melbourne should help you choose the best one for your home.

air conditioner repair

1. Window Units

The “unitary” air con window units are self-contained and often take a window placement. All its components come packaged in the single unit hence the unitary reference. The system works by expelling heat through the side placed facing outside the window. It then blows cold air inside.

The size of window cooling systems varies. The sizing dictates the amount of cooling the unit can provide. Smaller homes can get efficient cooling throughout with a larger sized window unit.

2. Portable Air Con Systems

The portable air con also falls under the unitary models. It is self-contained and also mobile meaning that it can be moved from room to room. The unit often gets placed on the floor and exhausts heat through a window based hose vent.

Portable units operate considerably noisily compared to other air con systems. They also offer small-scale cooling covering less than 500 square feet. Portable cooling sytems work best to  provide cooling for individual rooms or where window-mounted systems are impractical.

3. Ductless Cooling Systems

The ductless or split cooling systems are synonymously referred to as PTACs ( packaged terminal air conditioners). They are often used in apartments, motels, and hotels. Homes that cannot accommodate forced air cooling systems have also started using these systems.

In the air conditioning maintenance, the air con features two packages placed a distance away from each other. One of the units functions as the condensing unit placed outside the house. The other serves as the evaporative unit placed inside the house. The terminal units are interconnected using a refrigerant tubing running through the wall.

4. Central Cooling Systems

Also referred to as forced air systems, central air cons provide a premium cooling solution for your home. It operates quietly, functions optimally, and offers enhanced cooling comfort when compared to the rest. Central air conditioning units feature two packaged units. They include an evaporative unit placed on your furnace’s plenum and the condensing unit that gets placed outside the house. A refrigerant tubing connects the two units.

The challenge with central systems is selecting one in a correct size that is appropriate for your home. Improper sizing causes performance and humidifying issues.

Choosing a cooling system may prove challenging if you cannot determine your particular cooling needs. Even smaller homes might still end up with the wrong air con unit because several factors affect the decision. The size, build, and square footage of your home determines your home’s cooling load needs. Working with a cooling systems professional can help you figure out what air conditioning system works best for your home and how to do air conditioning repair.

air conditioning repair